invisible man illusion costume

by:Beauty Spirit     2020-08-11
This is very interesting for both of us.
I like making, he likes to be the focus of people\'s attention and make people smile.
I will continue to make these homemade costumes until he no longer allows me.
He received 1st places and 2nd places.
2 layers of disposable trench coat (Will cut)
2nd skin mask or clear fabric, matched with the lining of the trbench coat2 pair of trouser legs and bow stickers plastic bag or paper coat hooks
Plastic or foam will work)
I covered the head of a human body model with plastic wrap and used it as a mold for casting tape.
Make sure it\'s empty.
If you cover too much, you can always cut it down later.
Cover the mannequin with plastic packaging on the tape, wrap the head, but don\'t cover too much.
Let dry and cut the back of the head to take it out.
Just cut what you need to get rid of the mannequin.
Stick the wound together with super glue or epoxy, let the Dry epoxy or hot glue gun connect the hanger to the back of the inside bottom of the head to maintain stability and leave room for the last step, cut the bottom of the trench coat to enter the liner between the outside and the outside.
The wearer will hide here.
In the same area, fill the shoulders with paper to create shapes and good nesting areas for the wearer\'s overhead.
After you place everything and shape it the way you want it, just under the wearer\'s underarm, through the liner and shell of the coat, cutting out enough cracks
Plus long sleeves if cold)to fit through.
Align the sleeves with those holes and also go through those holes.
Tip: Be careful not to be too high, otherwise when the wearer relaxes his arm, it pulls down the whole thing and puts pressure on his neck.
Cut a hole in the lining for the wearer to see.
Use a black transparent mask, such as 2nd skin masks, to disguise the face of the wearer.
You need two pants in the same color.
Metal hangers seem to be the most economical option for these steps.
1st pants: Cut a small hole in the inner belt of one pair of pants.
Create a circle by cutting and threaded hangers.
Dig a hole large enough behind the knee for the wearer to wear his legs in 2nd pants.
2nd trousers: worn by the wearer.
No need to modify the bow tie: Use a hanger to cross the bow tie to form a circle.
Fix the pin on the windbreaker. (
Easier to place if the wearer is wearing clothes)
Sling: fixed near the shoulder and attached to the pants.
Then I nailed the windbreaker in front of my pants to give the garment a certain depth.
For me, the sling holder is enough to hold up the pants on its own.
Long Gloves help to maintain the illusion and not reveal the skin.
We ended up using long gloves that I covered with another layer of black winter gloves because it was cold here.
I want to wrap his hands and arms, but it looks like it can cause trouble while cheating or treating.
And it\'s not very warm.
For the head, I cut a small hole and let the hanger slide into the lining to keep it stable, then attach the head to the collar of the trench coat with a safety pin.
Bend the end of the hanger around some paper stuffing.
Make sure it doesn\'t stab the wearer.
When he handles the bottom, how to put it all in the upper half of the costume.
Let the wearer put on the corresponding pants and sit down and cross the foot through the back of the knee of the 1st pants.
Wearing a glove mask, a shoe rack, and a duck into the coat at the back of the linerGet head located on the arm may require assistance with the trouser legs to ensure that the 1st pants are sufficiently relaxed, can\'t pull on suspendersI, put the hat on it and it stays.
We skipped the sunglasses because I felt it was covered too much and we had to stick them on to get them to stay.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: